Dinan High Performance Intercooler for BMW 335i E90


Brand:

Product Code:
DIN-D330-0015

Price:
£1,461.02

Quantity:

Total Price
Share:
Greater power gains are achieved with a larger high performance intercooler. The Dinan intercooler provides a 93% increase in total volume, substantially reducing the pressure drop by 0.7 psi, as well as providing more efficient heat exchange. inchCool down inch time is also reduced, enabling the cars to produce full power under varying driving conditions such as stop and go traffic. The system has been engineered as a direct replacement for the stock unit, requiring only minor modifications for a clean, factory-like installation. The intercooler also features larger connector tubing and custom shrouding for maximum efficiency. Used in conjunction with Stage 2 Performance Engine Software, the intercooler produces an additional 5 horsepower as well as more consistent performance under varying driving conditions. The improved thermal efficiency will also enhance turbocharger reliability. The intercooler may also be used in conjunction with the Dinan oil cooler and Stage 3 Engine Software with increased boost pressure to take advantage of the improved intercooler efficiency. Dyno results for Stage 3 engine software; Dinan Intercooler; Dinan Oil Cooler, Free Flow Exhaust. Does not fit vehicles equipped with Active Cruise Control. Does not yet apply to cars with the M Aerodynamics package.

Fits; BMW; 3 Series; 335i, 335is; Sedan, Coupe, Convertible; E90, E92, E93; 2011 335i and xDrive E90, 2011-2013 335i and xDrive E92, 2011-2013 335i and xDrive E93, 2011-2013 335is E92, 2011-2013 335is E93,
There have been no reviews for this product yet.

Disclaimer

Any tuning/performance-based mods/work/quotes and products are strictly for off-road and motorsport use only. Performance mods/certain exhaust systems will cause your vehicle to fail the MOT emissions test, therefore rendering the vehicle unroadworthy and illegal to be used on UK roads. PLEASE BE AWARE – Sports cats can NOT legally be installed on a vehicle for use on a public road that was manufactured after 1st March 2001 unless Type ECE 103R is approved (identified by ‘103R’ in the exhaust product title). Fitting a Cat/Cat Bypass or GPF delete/bypass to a vehicle that is to be used on UK roads will cause the vehicle to fail the MOT emissions test, therefore rendering it unroadworthy and illegal to be used on UK roads.

Please note that UK regulations specify that the nearside and offside front door windows, for which the driver uses for forward vision, and when using external rear facing mirrors, must permit a light transmittance value of at least 70% ( for motor vehicles first used on or after 1st April 1985), with the front windscreen permitting a light transmittance value of 75%

Please note that factory fitted windows are already tinted and by adding additional tinting, this may result in vehicles no longer being compliant for Road use.
Read more