High Flow Valve for K03 Turbo on Audi, VW, and SEAT TFSi Engines | Forge
A high flow vacuum operated single piston valve for Audi, VW, and SEAT (VAG) 2.0 litre Petrol engines with the K03 turbo (the OEM valve is fitted directly to the turbo). Designed primarily to ensure that high volumes are discharged quickly.
This Valve is for atmospheric use only.
In The Box:
1 x FMDVHFTFSI Valve
1 x VW Plastic Pipe (1KO14577OP)
1 x Wiring Harness/Loom
1 x Solenoid, Bracket, and Screws
1 x Blanking Plug
1 x 2000mm of 4mm Vacuum Tube
1 x PCV Adaptor Kit
1 x Silicone Straight (25mm x 65mm)
1 x Silicone Bend Hose #1187
2 x 35mm Hose Clamps
2 x 45mm Hose Clamps
1 x Vacuum Tap, Gasket, and Bolts.
10 x Cable Ties
1 x Instructions
1 x Forge Sticker
If you wish to tune this product to fit the needs of your engine, please see the spring tuning kit below.
Related products
Disclaimer
Any tuning/performance-based mods/work/quotes and products are strictly for off-road and motorsport use only. Performance mods/certain exhaust systems will cause your vehicle to fail the MOT emissions test, therefore rendering the vehicle unroadworthy and illegal to be used on UK roads. PLEASE BE AWARE – Sports cats can NOT legally be installed on a vehicle for use on a public road that was manufactured after 1st March 2001 unless Type ECE 103R is approved (identified by ‘103R’ in the exhaust product title). Fitting a Cat/Cat Bypass or GPF delete/bypass to a vehicle that is to be used on UK roads will cause the vehicle to fail the MOT emissions test, therefore rendering it unroadworthy and illegal to be used on UK roads.Please note that UK regulations specify that the nearside and offside front door windows, for which the driver uses for forward vision, and when using external rear facing mirrors, must permit a light transmittance value of at least 70% ( for motor vehicles first used on or after 1st April 1985), with the front windscreen permitting a light transmittance value of 75%
Please note that factory fitted windows are already tinted and by adding additional tinting, this may result in vehicles no longer being compliant for Road use. Read more
Contact Info
- Address: Wrench Ltd. Ashford Road, London, Middlesex TW15 1XB
- Phone: 0208 571 4466
- Parts Enquiry: sales@wrenchstudios.co.uk
- General Enquiry: info@wrenchstudios.co.uk
