300psi pulse Solenoid


Brand:

Product Code:
300psiSOL

Price:
£94.96

Quantity:

Total Price
Share:

Our Pulse Series solenoids are ideal for applications which do NOT require the solenoid to be held open for long extended periods of time such as in diesel towing or MPG applications. This solenoid is intended for street/strip applications.  What makes this solenoid special is its small size, low amperage draw and ability to by cycled extremely fast making it ideal for progressive applications. Features include a large .125" orifice capable of flowing over 45 GPH @ 200 PSI with a maximum pressure rating of 300 PSI. Compare against the competitors’ valves and see the difference for yourself.   

Features Include:

  • .125" orifice
  • 300 psi max
  • EPDM plunger
  • 1/8 NPT female ports
  • Normally closed position
  • 16 gauge wire leads
  • Flows 45 gph @ 200 psi
  • Coil watts 9
  • Class "H" coil rating
  • Rated up to 355 degree's
  • Amperage draw .7 amps
  • Stainless steel valve body
  • Steel powder coated coil housing
  • Light weight plunger (5.9 grams)
  • Overall height 1.95"
  • Valve body diameter 1.00"
  • Coil housing diameter 1.03"
  • 20 minutes of continuous use recommended 
  • 100% methanol compatible 
  • Made in the USA

Special Notes:

  • Fittings are not included and provided as an option
  • Can be used with progressive controller and safely ran at 25 hertz @ 200 PSI, You may increase the hertz to 30 with lower pump pressure of 160 psi
There have been no reviews for this product yet.

Disclaimer

Any tuning/performance-based mods/work/quotes and products are strictly for off-road and motorsport use only. Performance mods/certain exhaust systems will cause your vehicle to fail the MOT emissions test, therefore rendering the vehicle unroadworthy and illegal to be used on UK roads. PLEASE BE AWARE – Sports cats can NOT legally be installed on a vehicle for use on a public road that was manufactured after 1st March 2001 unless Type ECE 103R is approved (identified by ‘103R’ in the exhaust product title). Fitting a Cat/Cat Bypass or GPF delete/bypass to a vehicle that is to be used on UK roads will cause the vehicle to fail the MOT emissions test, therefore rendering it unroadworthy and illegal to be used on UK roads.

Please note that UK regulations specify that the nearside and offside front door windows, for which the driver uses for forward vision, and when using external rear facing mirrors, must permit a light transmittance value of at least 70% ( for motor vehicles first used on or after 1st April 1985), with the front windscreen permitting a light transmittance value of 75%

Please note that factory fitted windows are already tinted and by adding additional tinting, this may result in vehicles no longer being compliant for Road use.
Read more