Stage 1 kit

This is the Coolingmist stage 1 water methanol injection kit. This kit comes with a boost switch for activation which can be set anywhere between 3-30psi (the kit will turn on as soon as boost exceeds the set point, running over 30psi is perfectly fine for the switch), the kit also includes a solenoid as standard taking away the risk of a failed check valve or the need to upgrade to a solenoid if you are doing direct port or post throttle body injection using a spacer plate etc.

The kit will also include an injector to suite your engine horse power.

This kit will work on all turbo/supercharged petrol or diesel vehicles, it’s very well suited to engines that are particularly low lag or a user not looking to be dependant for water meth.

Testing this setup is pretty easy. Remove the nozzle from your vehicle but leave the nozzle connected to the hose. Make sure only water is in your tank. Turn the key to your car on. Take the wire that is connected to Pin 1 on the boost switch and move it to pin 2. When you do that the system will inject. This will tell you if your wiring is correct. If this does not work, double check your wiring. Once you are done testing move the wire back to Pin 1.

Kit Contents

• 200psi pump
• Adjustable pressure switch 3-30psi
• 20ft of High Pressure Tubing
• Injector (please supply engine cc & max boost + rpm so we can supply appropriate sizes).
• Nozzle Holder
• 300psi Solenoid
• tank tap
• All fittings needed for installation
• Inline Fuse Holder with 10 amp fuse + Relay
• 10' of red and black wire
• Zip ties and wire splices and connectors