Front Brake Kit - 356mm (Wheels 18" or Larger) for the Audi TT Mk1 Platform 5x100 | Forge
A Big Brake kit with 6 pot calipers and 356x32mm ventilated discs. The discs are grooved to remove braking residuals and maintain optimum performance.
Included in the kit are Forge braided brakes hoses, mountings, and EBC pads. This kit is suitable for Audi TT, S3, A3, Seat Ibiza, Leon, Skoda Octavia, and VW Golf Mk4, with 18 inch or larger wheels. However depending on the wheel design wheel spacers may be required. For vehicles with 17" or smaller wheels please see our kit FMSBKTTMK1.
This brake kit is supplied with either our Forge Ceramic Brake Pads (FMBKPAD) or EBC Yellow Pads. For further information on EBC pads please see EBC website.
Each Caliper weighs 3.25kg
Each Disc weighs 9.35kg
***PLEASE NOT THIS IS FOR VEHICLES WITH 5X100 STUD PATTERN***
If you are unsure if this product is suitable for your application, please contact us.
Download our guide on how to clean and maintain your Forge Motorsport Big Brake Kit
Related products
Disclaimer
Any tuning/performance-based mods/work/quotes and products are strictly for off-road and motorsport use only. Performance mods/certain exhaust systems will cause your vehicle to fail the MOT emissions test, therefore rendering the vehicle unroadworthy and illegal to be used on UK roads. PLEASE BE AWARE – Sports cats can NOT legally be installed on a vehicle for use on a public road that was manufactured after 1st March 2001 unless Type ECE 103R is approved (identified by ‘103R’ in the exhaust product title). Fitting a Cat/Cat Bypass or GPF delete/bypass to a vehicle that is to be used on UK roads will cause the vehicle to fail the MOT emissions test, therefore rendering it unroadworthy and illegal to be used on UK roads.Please note that UK regulations specify that the nearside and offside front door windows, for which the driver uses for forward vision, and when using external rear facing mirrors, must permit a light transmittance value of at least 70% ( for motor vehicles first used on or after 1st April 1985), with the front windscreen permitting a light transmittance value of 75%
Please note that factory fitted windows are already tinted and by adding additional tinting, this may result in vehicles no longer being compliant for Road use. Read more
Contact Info
- Address: Wrench Ltd. Ashford Road, London, Middlesex TW15 1XB
- Phone: 0208 571 4466
- Parts Enquiry: sales@wrenchstudios.co.uk
- General Enquiry: info@wrenchstudios.co.uk
