Ford Fiesta ST180 Boost Tap | Forge


Brand:

Product Code:
FMBGFK4

Price:
£51.74

Quantity:

Total Price
Share:

Boost Tap for Ford Focust ST 180 (Mk7). This adaptor plate installs between the boost (MAP) sensor and mounting surface.  This allows a tap to run a vacuum operated valve or for connection to a boost gauge.

When running this tap you are also able to retain your original engine cover.

 

In the box:
1 x Vacuum tap
1 x M6x20 Allen Cap Bolt
10 x Cable Ties
1 x 2000mm of 4mm Vacuum Tube

There have been no reviews for this product yet.

Disclaimer

Any tuning/performance-based mods/work/quotes and products are strictly for off-road and motorsport use only. Performance mods/certain exhaust systems will cause your vehicle to fail the MOT emissions test, therefore rendering the vehicle unroadworthy and illegal to be used on UK roads. PLEASE BE AWARE – Sports cats can NOT legally be installed on a vehicle for use on a public road that was manufactured after 1st March 2001 unless Type ECE 103R is approved (identified by ‘103R’ in the exhaust product title). Fitting a Cat/Cat Bypass or GPF delete/bypass to a vehicle that is to be used on UK roads will cause the vehicle to fail the MOT emissions test, therefore rendering it unroadworthy and illegal to be used on UK roads.

Please note that UK regulations specify that the nearside and offside front door windows, for which the driver uses for forward vision, and when using external rear facing mirrors, must permit a light transmittance value of at least 70% ( for motor vehicles first used on or after 1st April 1985), with the front windscreen permitting a light transmittance value of 75%

Please note that factory fitted windows are already tinted and by adding additional tinting, this may result in vehicles no longer being compliant for Road use.
Read more