20mm Audi, VW, SEAT, and Skoda Alloy Wheel Spacers | Forge
Before fitment, please ensure the spacer fits flat to the back of the wheel. Please also test for clearance after fitment at the wheel arch under full right and left wheel lock.
These wheel spacers are hubcentric
These CNC machined precision alloy wheel spacers are 20 mm thick with a 57.1mm bore and dual 5 stud bolt pattern for both 100 and 112mm PCD fitments. The spacers are anodised black to inhibit corrosion and "bonding" to the wheel or hub and are machined with an alloy spiggot to allow centering on the hub. (often called "hubcentric" spacers) The spacers are suitable for most vehicles produced by the Volkswagen, SEAT, Audi, Skoda group. A 20mm spacer will give an overall track increase of 40mm when fitted to both sides of an axle.
These spacers are priced and sold per pair.
Please note: Our 11mm, 16mm, and 20mm hubcentric wheel spacers will NOT work on the rear wheels of the MK3 VW 5x100 applications due to the longer length of the center spiggot. There is no problem with the smaller 3mm, 5mm, and 8mm NON-hubcentric spacers.
Please note:Extended wheel bolts are not supplied.
In The Box:
2 x FMWS20 20mm Wheel Spacer
1 x Forge Sticker
Related products
Disclaimer
Any tuning/performance-based mods/work/quotes and products are strictly for off-road and motorsport use only. Performance mods/certain exhaust systems will cause your vehicle to fail the MOT emissions test, therefore rendering the vehicle unroadworthy and illegal to be used on UK roads. PLEASE BE AWARE – Sports cats can NOT legally be installed on a vehicle for use on a public road that was manufactured after 1st March 2001 unless Type ECE 103R is approved (identified by ‘103R’ in the exhaust product title). Fitting a Cat/Cat Bypass or GPF delete/bypass to a vehicle that is to be used on UK roads will cause the vehicle to fail the MOT emissions test, therefore rendering it unroadworthy and illegal to be used on UK roads.Please note that UK regulations specify that the nearside and offside front door windows, for which the driver uses for forward vision, and when using external rear facing mirrors, must permit a light transmittance value of at least 70% ( for motor vehicles first used on or after 1st April 1985), with the front windscreen permitting a light transmittance value of 75%
Please note that factory fitted windows are already tinted and by adding additional tinting, this may result in vehicles no longer being compliant for Road use. Read more
Contact Info
- Address: Wrench Ltd. Ashford Road, London, Middlesex TW15 1XB
- Phone: 0208 571 4466
- Parts Enquiry: sales@wrenchstudios.co.uk
- General Enquiry: info@wrenchstudios.co.uk
